Tenax Ultra Long Cling Cleaner

TENAX® Ultra is a star performer from a range of new generation TENAX® chemicals that have been designed to give prolonged adherence to vertical and horizontal surfaces, thereby making full use of the chemical energy available. The outcome of this extended contact time is a superior cleaning result to what has previously been available, which allows you to reduce the other inputs involved in cleaning, such as manual labour, hot water, and time. TENAX® Ultra has been formulated to deal with very high levels of fatty, greasy, oily and proteinaceous soiling, and in most cases, will remove protein and fatty films without the need to manually scrub or pre-rinse with hot water. TENAX® Ultra has been shown to also be excellent at removing tarred and carbonaceous soils, where fats and proteins have been heat denatured or burnt on. TENAX® Ultra will cope with very high levels of water hardness, and rinses freely.

Features:

* Long residence time, particularly on vertical and intricate surfaces
* Concentrated, and cost-effective at in-use rates
* Very good wetting ability
 

Benefits:

* No re-application of chemical necessary
* Peace of mind that hard to clean areas have had exposure to chemical for the recommended time
* Lowers your total cost of cleaning, as it performs more of the cleaning task by itself, allowing you to minimise the other inputs
* Wets out soils and works fast and completely
 

Directions for use:

* TENAX® Ultra should not be used on soft metals such as aluminium, copper or brass
* TENAX® Ultra should be applied at concentrations in the range of 5-20% v/v (50-200 mls/ltr), dependent on the soil level to be tackled. Most applications will require only 5% v/v concentration. (Concentrations below 5% may result in inadequate thickening when diluted, leading to poor residence time on surfaces). Only mix TENAX Ultra with cold/ambient water – not hot
* TENAX® Ultra can be applied via standard spray or air-assisted foam application equipment. Leave TENAX® Ultra to dwell on surfaces for 10-15 minutes before rinsing. TENAX® Ultra will rinse more quickly from surfaces if you use warm/hot water to rinse instead of cold
* For use directions specific to your application, consult your Hygiene Technologies representative
* SPECIAL PRECAUTIONS: – Do not store at extremes of temperature or in direct sunlight. Always leave containers sealed tightly – do not leave open to the air
* Always mix very thoroughly with water before applying. Preferably dose through automated equipment
 

AsureQuality Approved Organic Input