Revive Acid Cleaner 

Revive is a powerful blend of different acids and surface-active agents designed to remove surface rust, scale and stone deposits from stainless steel surfaces in the food and beverage industry. Revive works quickly and leaves stainless steel surfaces brighter and can be applied via air-assisted foamer, sprayer or used to soak components in a tank situation.

DIRECTIONS FOR USE:

Use only on acid resistant surfaces and components. If necessary, pre-clean surfaces with a suitable alkaline cleaner to remove organic soil deposits and rinse well before applying Revive.

Foam or spray application: Apply at between 2-20% v/v (20-200mls per litre of water) depending on degree of soiling to be removed and length of time since last acid clean. Leave in contact for minimum of 10 minutes, then rinse surfaces thoroughly with potable water and allow to air-dry.

Soak tank application: Make up solution in container at 10-20% v/v (100-200 mls per Litre of water) and submerge pre-cleaned items fully to soak. If possible, heat the solution and maintain it at 60°C to speed up cleaning time. Do not leave items to soak for more than 30 minutes at a time, before rinsing thoroughly with potable water and allowing to air-dry.