Cleaners
Showing all 9 results
-
Presto - 5L/20L/200L
Item Code: OP240$19.23 – $460.43PRESTO is an all purpose, neutral detergent that can be used on any water washable hard surface to remove general dirt and greasy soils, and rinse easily.Features:* Contains a mixture of anionic and nonionic surfactants, and mild alkalis* Contains no NPE’s or formaldehyde based preservatives* Non scented* Good level of active ingredientsBenefits:* Great degreasing and emulsifying action on greasy soils and general dirt* Environmentally sound* Suitable for use in food processing facilities* Good performance at an economical use rateDirections for use:* General cleaning: Use at 4 mls/ltr of warm/hot water. For extra greasy or heavily soiled items, use at up to 20 mls/ltr. Do not mix this detergent with disinfectants, as it will reduce both products effectiveness. As per conditions of a C38 Approval, no product or packaging can be present in the room during cleaning, and cleaned objects must be rinsed with potable water before production starts.Please click on 'Resources' tab above for all approvals and data sheets -
Ultrakleen HF - 20L/200L/1000L
Item Code: OP320$153.55 – $4,209.05ULTRAKLEEN HF is a strong alkali foam cleaner with added solvency and sequestering ability. ULTRAKLEEN HF is designed to remove difficult soiling from processing equipment in the Food Industry.Features: * Caustic soda base to attack fats, oils and grease build ups.* Added solvent increases grease stripping ability.* Blend of sequestering and chelating agents ensures removal of complex soils, and easy rinsing.* High, stable foam profile.* Effective at low temperatures. Benefits: * Removes highly tarred and carbonaceous soils – e.g. smokehouses.* Foam remains on surface for longer, giving more effective clean.* Effectiveness at low temperatures reduces energy usage and condensation problems.* Can be used as a first-step cleaner for areas of heavy fat and oil build ups, where a chlorinated cleaner is undesirable. Directions for use: * Manual Cleaning - Use ULTRAKLEEN HF at 0.5-2.0% (5-20 mls/ltr) in warm (30-40°) water. Scrub or mop the surface, and leave solution in contact with it for 5-15 minutes. Rinse off with cold or warm potable water.* Foam Cleaning – Use ULTRAKLEEN HF at 1.0-2.0% (10-20 mls//ltr). Apply to vertical surfaces from the bottom up, and leave in contact for 15-20 minutes. Agitate where necessary with a brush or scourer, then rinse off with cold or warm potable water.* Used with the correct antifoam additive, ULTRAKLEEN HF has also proved to be an excellent heavy duty cleaner for unsealed floors when used through an auto-scrubber. Consult your Account Manager for specific use instructions. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Tech 5820 Powder Alkaline Cleaner - 20 Kg
Item Code: OPL420$192.79TECH 5820 is a powerful alkali cleaner, primarily designed for use in cleaning hooks, gambrels and skids used in the meat-processing industry. TECH 5820 can also be used for remedial maintenance cleaning and for degreasing factory floors that have accumulated build upFeatures:* Contains sodium hydroxide and sodium metasilicate for dual-alkaline performance.* Contains sequestrants and water conditioning agents.* Readily soluble.* Removes fat, proteins, rust, oil and rail grease from ferrous metal surfaces.Benefits:* Metasilicate content helps retain alkalinity and provides a level of soft metal protection.* Sequestrant and specialty surfactant mixture keeps soil from re-depositing, aids in reducing scale build up, andhelps solution to “wet out” without excess foaming.* Safer to store and handle than a liquid solution.* Economical and fast acting.Directions for use:* Depending on the type and severity of the soil, concentration rates will vary. However, a typicalrecommendation for hooks and gambrels would be between 15-20% (150-200 grams/litre of water) at atemperature of 85-100°C for 10 minutes. More time should be allowed for very heavily soiled items.* To prepare a tank, fill it with water, and heat to 50-60°C. Start adding the powder slowly at this point, bysprinkling over the surface of the water with a scoop. (See note below.) As the water heats, continue adding thepowder until the correct amount is in the tank. Stir the solution slowly with a stainless-steel stirrer to ensurethat the powder is completely dissolved. Once the water has reached the target operating temperature, thetank is ready for use.- Do NOT add large volumes of this product to the tank all at once. Add small amounts gradually.- Wear full PPE for this operation. Refer to the SDS.Please click on 'Resources' tab above for all approvals and data sheets$192.79 (Excl. GST) -
Tenax Ultra - 20L/200L/1000L
Item Code: OP506$185.72 – $6,900.63TENAX® Ultra is a star performer from a range of new generation TENAX® chemicals that have been designed to give prolonged adherence to vertical and horizontal surfaces, thereby making full use of the chemical energy available. The outcome of this extended contact time is a superior cleaning result to what has previously been available, which allows you to reduce the other inputs involved in cleaning, such as manual labour, hot water, and time. TENAX® Ultra has been formulated to deal with very high levels of fatty, greasy, oily and proteinaceous soiling, and in most cases, will remove protein and fatty films without the need to manually scrub or pre-rinse with hot water. TENAX® Ultra has been shown to also be excellent at removing tarred and carbonaceous soils, where fats and proteins have been heat denatured or burnt on. TENAX® Ultra will cope with very high levels of water hardness, and rinses freely.Features: * Long residence time, particularly on vertical and intricate surfaces* Concentrated, and cost-effective at in-use rates* Very good wetting ability Benefits: * No re-application of chemical necessary* Peace of mind that hard to clean areas have had exposure to chemical for the recommended time* Lowers your total cost of cleaning, as it performs more of the cleaning task by itself, allowing you to minimise the other inputs* Wets out soils and works fast and completely Directions for use: * TENAX® Ultra should not be used on soft metals such as aluminium, copper or brass* TENAX® Ultra should be applied at concentrations in the range of 5-20% v/v (50-200 mls/ltr), dependent on the soil level to be tackled. Most applications will require only 5% v/v concentration. (Concentrations below 5% may result in inadequate thickening when diluted, leading to poor residence time on surfaces). Only mix TENAX Ultra with cold/ambient water – not hot* TENAX® Ultra can be applied via standard spray or air-assisted foam application equipment. Leave TENAX® Ultra to dwell on surfaces for 10-15 minutes before rinsing. TENAX® Ultra will rinse more quickly from surfaces if you use warm/hot water to rinse instead of cold* For use directions specific to your application, consult your Hygiene Technologies representative* SPECIAL PRECAUTIONS: - Do not store at extremes of temperature or in direct sunlight. Always leave containers sealed tightly – do not leave open to the air* Always mix very thoroughly with water before applying. Preferably dose through automated equipment Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Opal Presto Cold Detergent - 20 Ltr
Item Code: OP242-20$67.49PRESTO COLD is an all purpose, neutral detergent that can be used on any water washable hard surface to remove general dirt and greasy soils, and rinse easily. It is specially formulated to retain it’s thin, pumpable viscosity at refrigeration temperatures.Features:• Contains a mixture of anionic and nonionic surfactants, and mild alkalis• Contains no NPE’s or formaldehyde based preservatives• Non scented• Good level of active ingredients• Retains a pumpable viscosity at refrigeration temperaturesBenefits:• Great degreasing and emulsifying action on greasy soils and general dirt• Environmentally sound• Suitable for use in food processing facilities• Good performance at an economical use rateDirections for use:• General cleaning: Use at 4 mls/ltr of warm/hot water. For extra greasy or heavily soiled items, use at up to 20 mls/ltr. Do not mix this detergent with disinfectants, as it will reduce both products effectiveness.Please click on 'Resources' tab above for all approvals and data sheets$67.49 (Excl. GST) -
Lifft Natural Abrasive Creme Cleaner - 5 Ltr
Item Code: OP504-5$74.88Powerful heavy-duty cleanser with a fine natural abrasive. Ideal for removing build-ups of difficult to remove soils, without harsh scratching of the surface. Unscented, so can be used in food-processing areas, as well as in kitchens and bathrooms. DIRECTIONS FOR USEApply undiluted, using a damp cloth, sponge or scourer. While the abrasive is fine-grade, prolonged use or heavy scrubbing on plastic, painted, laminated or chromed surfaces is not recommended. When used in food production areas, all surfaces must be rinsed thoroughly with potable water before production starts, as per conditions of an MPI C41 Approval. MPI APPROVED C41 (All animal product except dairy)$74.88 (Excl. GST) -
Redex Acid Cleaner - 20 Ltr
Item Code: OP422-20$208.29REDEX is a phosphoric acid-based detergent designed for removing surface rust from ferrous metals and it will also provide some protection against subsequent re-rusting. REDEX can also be used to remove hardness and stone deposits and oxide films from steel and other acid-resistant surfaces. REDEX contains wetting and emulsifying surfactants and is coloured red to provide a visual indication not to store near or mix with strong alkalis.DIRECTIONS FOR USERust removal - Use Redex diluted to 33%-50% v/v (300mls-500mls/litre), dependent on level of rust. Apply to surface for 5-30 minutes to remove light film. Agitate if practical and rinse off with cold water. Food contact surfaces must be thoroughly rinsed with potable water before production starts.MPI APPROVED C31 (All animal product except dairy)$208.29 (Excl. GST) -
Opal Nitrigel Acid Cleaner - 20 Ltr
Item Code: OP070-20$136.40Nitrigel is a thixotropic gel product that utilises a powerful blend of acids to remove heavy scale from stainless steel equipment in the Food, Beverage and Dairy industries. Because Nitrigel sticks to vertical surfaces for extended periods, it allows the chemistry to complete the task without the need for manual agitation.DIRECTIONS FOR USENitrigel is used neat and can be applied via a tank style foamer or a pressurised sprayer. Leave Nitrigel on the surface for at least 20-30 minutes before rinsing off thoroughly with potable water. Do not use on mild steel.MPI Approved C31 (All animal product except dairy)$136.40 (Excl. GST) -
Tech 30AF - 25 Kg
Item Code: OP912$1,022.51Tech 30AF is a high-performance food grade antifoam for food processing and manufacturing use, and is easy to handle and dose, and is non-hazardous. Having 30% total actives means Tech 30AF is very economical in use. Non-allergen, non-GMO and USFDA 21 CFR compliance for Tech 30AF is available on request. DIRECTIONS FOR USETech 30AF can be added to the foaming mixture, baths, formulations or waste/process water either manually or with a dosing pump. Adjust the addition rate to optimise defoaming. Tech 30AF may be diluted with water prior to use, but the diluted mixture will require agitation or circulation over time to stop separation. Mix well before use. Tech 30AF can be used up to a level of 33ppm of the volume of water it is added to – this will give a maximum of 10ppm of the silicone active on the finished food product, which complies with current applicable limits. Tech 30AF is stable for 12 months when undiluted and stored below 30°C.$1022.51 (Excl. GST)