CIP chemicals
Showing all 5 results
-
Tech 345 Alkaline CIP Detergent - 15L/200L/1000L
Item Code: OP472$145.71 – $3,752.24TECH 345 is a concentrated heavy duty built liquid caustic detergent formulated for CIP and recirculationcleaning of varied dairy, beverage and food industry processing equipment. Tech 345 is quick acting, odourless and non-foaming. Tech 345 contains 45% w/w high purity membrane-grade caustic soda and very effective chelating agents. Freezing point is approximately 8°C.Features:• High sodium hydroxide content provides good organic soil removal properties• Contains chelating and suspending agents• Odourless and non-foamingBenefits:• Concentrated nature ensures low in-use concentrations and costs• Quickly breaks up and suspends soils• Liquid – ease of dosing• Free rinsingDirections for use:• Use at between 0.5 – 2.0% v/v (5 – 20 mls/ltr) for most applications.• A 1% v/v solution of Tech 345 in soft water, will equal approximately 40,000 uS/cm @ 25°C.• Use-concentration, circulation time and temperature are all dependent on what has been processed in the circuit prior to cleaning, so contact a Hygiene Technologies representative for specific use instructions for your situation if you are unsure.• All items cleaned must be rinsed with potable water before re-usePlease click on 'Resources' tab above for all approvals and data sheets -
Tech 545 Alkaline CIP Detergent - 15L/200L/1000L
Item Code: OP470$121.02 – $3,723.14TECH 545 is a concentrated alkaline detergent designed for CIP and recirculation cleaning of dairy, beverage and food industry processing equipment. Tech 545 provides rapid wetting and emulsifying performance with free rinsing properties due to its specialist “zero foaming” surfactant and has excellent chelating properties. Tech 545 contains 45% w/w high purity membrane-grade caustic soda. Freezing point is approximately 8°C.Features:• High sodium hydroxide content provides good organic soil removal properties• Good soil suspension• Odourless and non-foaming• Contains wetting agentsBenefits:• Concentrated nature ensures low in-use concentrations and costs• Quickly breaks up and suspends soils• Liquid – ease of dosing• Wetting agents reduce surface tension which improves the cleaning performance and enhances rinsingDirections for use:• Use at between 0.5 – 2.0% v/v (5 – 20 mls/ltr) for most applications.• A 1% v/v solution of Tech 545 in soft water, will equal approximately 40,000 uS/cm @ 25°C.• Use-concentration, circulation time and temperature are all dependent on what has been processed in the circuit prior to cleaning, so contact a Hygiene Technologies representative for specific use instructions for your situation if you are unsure.• All items cleaned must be rinsed with potable water before re-usePlease click on 'Resources' tab above for all approvals and data sheets -
Tech 298 Acid Cleaner - 20L/200L
Item Code: OP460$182.93 – $1,148.78TECH 298 is a concentrated blend of Nitric and Phosphoric acid, designed for use in CIP applications in the food – processing industry. TECH 298 is used in the “acid phase” of a CIP cycle, to remove scale and stone deposits from process lines and surfaces.Features: * Optimum blend of two strong acids* Non-foaming* Concentrated product* Nitric acid has biocidal properties Benefits: * Nitric acid is excellent at removing inorganic soils, while Phosphoric acid provides a degree of detergency and passivation.* Will not cause foam build ups in CIP circuits.* Use at low use concentrations for an economical clean.* Provides additional biocidal control, due to the oxidising properties of the Nitric acid content, and the low operating pH. Directions for use: * For normal CIP cleaning, or soak cleaning of acid-resistant components, prepare a 0.5 – 1.0% w/v solution (50-100 grams) per 10 ltrs of water. Circulate as required (normally 15-20 minutes), at a temperature of 30-50C. Rinse lines or surfaces with potable water after cleaning, and before production starts. Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Parameter Cleaner Sanitiser - 20L/200L/1000L
Item Code: OP458$132.52 – $4,445.90PARAMETER is a concentrated, low foaming, broad spectrum chlorinated alkaline liquid detergent. PARAMETER is designed for use in CIP, recirculation cleaning and spray-washing applications of food processing equipment.Features: • Provides excellent detergency, soil suspension and disinfection properties for CIP applications across all sectors of the food industry.• Highly effective at protein removal, quickly breaks down and suspends soils.*Contains at least 320ppm FAC @ 1% solution at time of manufacture.• Contains wetting agents to reduce surface tension and caustic carry-over.• Provides broad spectrum biocidal action.Benefits: • Active against a wide variety of food soils.• Hard water tolerant, ensuring scale free equipment and improved efficiency. Free rinsing, saving rinse water.• Low foaming under high turbulence and in the presence of protein.Directions for use: • For the majority of CIP and spray-washing applications, PARAMETER is used at between 0.2 – 1.0% v/v (200ml –1000ml / 100ltrs) in water up to 65 – 75°C. Specific rates and circulation times can be given for your specific application by your Hygiene Technologies representative. All cleaning with PARAMETER should be followed by a potable water rinse before production starts.Please click on 'Resources' tab above for all approvals and data sheets AsureQuality Approved Organic Input -
Tech 1630 H.D. Acid Detergent - 20L/200L
Item Code: OP416$183.43 – $1,518.59TECH 1630 is a heavy duty acid detergent designed for use in CIP and immersion cleaning of mineral and protein soils from ferrous metals.Features:* Odourless and free-rinsing.* Low foaming.* Very good wetting and penetrating properties.Benefits:* Concentrated acid detergent.* Phosphoric acid and surfactant blend will remove mineral deposits and aid in the removal of organic soiling also.* Removes scale and brightens mild steel.* Excellent soil penetration.* Non-corrosive to stainless steel at in-use dilutions.Directions for use:* CIP: For the removal of scale, milkstone and mineral deposits use at 0.5 – 0.7% v/v; temperature 65 – 75°C and cleaning time approximately 15 minutes.* Immersion Cleaning: Typically a concentration 20% v/v is required. Temperature should be from ambient to 60°C with an immersion time from 5 minutes to 1 hour depending on degree of soiling. Rinse with water after cleaning step.Please click on 'Resources' tab above for all approvals and data sheets
